|
Model:UPD-8 requency power
1£® 8Channel control with 20A relay, metch internation
standred.
2£® 10 bit A/D convertor for load power detection.
3£® Can be turned ON/OFF separately by sequence for
music system.
4£® Over load warring and cut off the channel.
5£® Can control every channel ON/OFF by the switch on the panel.
6£® 8 LED display the power output.
7£® Can show and record work state of each channel.
8£® Can connected 8 UPD-8 at the same time. |
|
When the sequence
power switch on, you can use the switch on panel to turn ON and
turn OFF any one of the power output promptly online, So
to deal with the sudden fault of the equipment.
UPD-8 is very convenient to be used when more one UPD-8
link. You only need to connect the UPD-8 one by one with
the 6.3 data control cable. After connected , the
microchip in UPD-8 that can receive the command from
front sequence power for intelligence control. For example,
16 bit A/D load power detect. If over load can auto cut
off this channel but not disturb other channel work
continue. 8 LED indicat for each channel power output.
Can connected 8 UPD-8 at the same time. |
¡¡ |
Description
1.8 channel power output with relay control from the
microchip.
2.Each channel 4400W 220V 50Hz.
3.Link allow up to eight UPD-8 device with 6.3 data
cord.
4.Control voltage DC 12V for circuit in it.
5.Output connectors use EURO standard three wire AC
connect.
6.Power source :220V 50Hz standard three wire,Grounded
wire is needed.
7.Dimension :522mmX442mmX78mm
8.Gross weight: 5.7 Kg
Back side decription:
A. Power output connectors(4 ports USA stype)
B. Power output connectors (4 ports mulit stype)
C. Power cord
D. 6.3 female socket¡¡ |
¡¡ |
¡¡
¡¤
When more sequence power controllers
are used in a system, you can use option parts that the
data cord connect between them.
¡¤
When the appliance is over 8 channels
and less 16 channels, two UPD-8 machine is needed.
¡¤
When the appliance is over 16 channels
and less 24 channels, three UPD-8 machine is needed, and
so forth.
¡¤
USB ports for the option parts USB LED
light up your audio system.
¡¤
Independent eight channels control mode
with CPU .
¡¡ |
¡¡ |
¡¤
UPD-8
The sequence power controller suited for audio system,
computer, TV broadcast and other equipment. It can
prevent sound system from over current and prevent
electrified wire netting from electrical equipment.
¡¤
When the switch on, the controller can
connect the power of all output sockets in proper order.
When the switch off, the controller can cut the power
of all output sockets in contrary order.
¡¤
When the BYPASS switch off, every
channel can independence control by the switchs (CH1 to
CH8), if the BYPASS switch off, all output according to
pre set.
¡¡ ¡¡ |
¡¡ |
¡¤
When more sequence power controllers
are used in a system, you can use option parts that the
data cord connect between them.
¡¤
When the appliance is over 8 channels
and less 16 channels, two UPD-8 machine is needed.
¡¤
When the appliance is over 16 channels
and less 24 channels, three UPD-8 machine is needed, and
so forth.
¡¤
USB ports for the option parts USB LED
light up your audio system.
¡¤
Independent eight channels control mode
with CPU .
¡¡¡¡ |
¡¡ |
¡ñ Control power : 8 channels (connect 2000W*n channel
power, n=1,2,3¡)
¡ñ Time-lapse(per channel) : 2 seconds
¡ñ Gross weight: 6.7 Kg¡¡ |
¡¡ |
¡ñ Rated output voltage : AC 220V, 50-60Hz
¡ñ Rated output current(per channel) : 25A
¡ñ
Dimension :552mmX442mmX78mm
¡ñ Net weight£º5.7Kg |